T6C-017-1R00B5 Parker Denison T6C Vane Pump 58.3cc 275bar

Product Overview

The T6C / T6E series are Parker Denison T6 fixed-displacement single vane pumps designed for industrial high-pressure hydraulic systems. These units are precision direct interchanges for original Denison T6 models including T6 C 017 1R00B5, T6C-B08-3R00-A1M1 and T6E 057 1R00 B1. Featuring advanced cartridge construction and hydraulically balanced vanes, they deliver high volumetric efficiency and low noise. Every pump undergoes 100% simulated duty-cycle testing to guarantee exact match of mounting flanges, shaft ends, port locations and performance curves.

Technical Specifications 

• Models: T6 C 017 1R00B5 / T6C-B08-3R00-A1M1 / T6E 057 1R00 B1 (and T6C / T6E range)
• Geometric displacement: 017 = 58.3 cm³/r; B08 = 26.4 cm³/r; 057 ≈ 183–196 cm³/r (T6E)
• Continuous rated pressure: up to 240–275 bar depending on size and fluid
• Peak pressure: up to approx. 300 bar intermittent
• Maximum speed: up to 2200–2800 r/min depending on displacement
• Minimum recommended speed: approx. 600 r/min
• Control type: Fixed displacement (no variable control); keyed or splined shaft; clockwise or counterclockwise rotation
• Approximate weight: T6C 16–25 kg; T6E 40–50 kg
• Ports: SAE flange
• Seals: Buna-N / Viton / EPDM optional
• Mounting flange: SAE B (T6C) or SAE C/E (T6E)

Key Technical Advantages

1. Cartridge design: Allows rapid cartridge replacement without removing the pump body, minimizing downtime.
2. Hydraulically balanced vanes and floating side plates: Reduce wear and automatically compensate clearance for high volumetric efficiency and low internal leakage.
3. Precision machining for true interchangeability: Matches original Denison mounting dimensions, shaft ends and port orientations exactly—direct drop-in replacement.
4. Low noise and high reliability: Optimized flow paths minimize ripple; quality bearings and seals support continuous high-pressure duty.
5. 100% simulated operating-condition testing: Full pressure, flow, leakage and noise verification ensures consistency with OEM performance curves.

Application Areas

Injection molding machines, die-casting machines, machine-tool hydraulic systems, presses, steel and metallurgical equipment, port machinery, industrial power units and medium-to-high-pressure fixed hydraulic systems.

Expert Maintenance Tips

Ensure precise shaft alignment during installation to avoid excessive radial or axial loads. Maintain inlet pressure between 0 and 0.5 bar to prevent cavitation. Use anti-wear hydraulic oil (ISO VG 32–68 recommended); target system cleanliness of ISO 18/16/13 or better. Fully bleed air before initial start-up and monitor temperature and leakage during break-in. Cartridge kits can be replaced without removing the pump body. Periodically inspect shaft seals and bearings; never allow dry running.