3525V25A17-1CC-22R Vickers Double Vane Pump 81+55cc 172bar

Product Overview

The 2520V / 2520VQ / 3520V / 3520VQ / 3525V / 3525VQ series are Eaton Vickers (now Danfoss) V / VQ Series fixed-displacement double vane pumps available in industrial (V) and mobile (VQ) versions, designed for hydraulic systems requiring independent dual-circuit output. These units are precision direct interchanges for original Vickers double pumps including 3525V25A17-1CC-22-R and 3525V30A12-1CC-22-R. Featuring a balanced vane design and precision-machined cartridges, they deliver high volumetric efficiency and low noise. Every pump undergoes 100% simulated duty-cycle testing to guarantee exact match of mounting flanges, shaft ends, port locations and performance curves.

Technical Specifications 

• Models: 3525V25A17-1CC-22-R / 3525V30A12-1CC-22-R (and 2520V / 2520VQ / 3520V / 3520VQ / 3525V / 3525VQ range)
• Geometric displacement: Shaft-end (35V) Code 25 = 81 cm³/r; Code 30 = 97 cm³/r; Cover-end (25V) Code 17 = 55 cm³/r; Code 12 ≈ 39–40 cm³/r
• Continuous rated pressure: Industrial 172 bar (2500 psi); Mobile VQ up to 210 bar
• Peak pressure: approximately 190–230 bar depending on conditions
• Maximum speed: Industrial 1800 r/min; Mobile VQ up to 2500–2700 r/min
• Minimum recommended speed: approx. 600 r/min
• Control type: Fixed displacement (no variable control); independent dual outputs; straight-keyed or splined shaft options; configurable port positions (e.g. CC)
• Approximate weight: 30–45 kg depending on configuration
• Ports: Standard SAE 4-bolt flange
• Seals: Standard or Viton (F3) optional
• Mounting flange: Standard SAE C

Key Technical Advantages

1. Independent dual-output design: Shaft-end and cover-end sections supply separate circuits, enabling compact dual-circuit systems.
2. Balanced vane and floating side-plate design: Hydraulic balancing reduces vane wear; floating plates automatically compensate clearance for high volumetric efficiency and low internal leakage.
3. Precision machining for true interchangeability: Rotor, cam ring and side plates match original Vickers tolerances, mounting dimensions, shaft ends and port orientations exactly—direct drop-in replacement.
4. Low noise and long-life bearings: Optimized flow paths and vane configuration minimize ripple and noise; quality bearings and seals support industrial or mobile duty.
5. 100% simulated operating-condition testing: Full pressure, flow, leakage and noise verification ensures consistency with OEM performance curves.

Application Areas

Injection molding machines, die-casting machines, machine-tool hydraulic systems, presses, steel and metallurgical equipment, port machinery, construction equipment, industrial power units and hydraulic systems requiring dual independent circuits.

Expert Maintenance Tips

Ensure precise shaft alignment during installation to avoid excessive radial or axial loads. Maintain inlet pressure between 0 and 0.35 bar to prevent cavitation. Use anti-wear hydraulic oil (ISO VG 32–68 recommended); target system cleanliness of ISO 18/16/13 or better. Fully bleed air before initial start-up and monitor temperature and leakage during break-in. Cartridge kits can be replaced without removing the pump body. Periodically inspect shaft seals and bearings; never allow dry running. Verify that combined torque does not exceed the shaft rating.

Related Models：