VPE Series Hydraulic Pumps VPE-F40C-10 VPE-F40D-10 VPE-F12C-10 VPE-F12D-10 VPE-F15A-10 VPE-F15B-10
| Model Number | VPE-F40C-10 |
|---|
Product Description
VPE series hydraulic pumps of vane pump VPE-F40C-10 VPE-F40D-10 VPE-F12C-10 VPE-F12D-10 VPE-F15A-10 VPE-F15B-10
The hydraulic vane pump is a pump in which the vane in the rotor groove contacts with the pump housing (stator ring) and pushes
the suction liquid from the oil inlet side to the oil outlet side. In addition to the management of the hydraulic vane pump need
to prevent dry rotation and overload, prevent the inhalation of air and vacuum too large, should also pay attention to:
1. Hydraulic vane pump steering change, then its suction and discharge direction also changes the hydraulic vane pump have a
specified steering, not allowed to reverse. Because the rotor cotyledon groove is inclined, the blade is chamfered, the bottom of
the blade is connected with the oil discharge chamber, and the throttle groove and suction and outlet on the oil distribution
plate are designed according to the established steering. Reversible hydraulic vane pumps must be specially designed.
2. Assembly of hydraulic vane pump: oil distribution plate and stator: pin is correctly positioned, the blade, rotor, oil
distribution plate shall not be installed in reverse, the stator inner surface suction area is easy to wear, when necessary, the
hydraulic vane pump can be reversed installation, so that the original suction area into the discharge area and continue to use.
3. Hydraulic vane pump disassembly: pay attention to the clean working surface, working oil should be well filtered.
4. The clearance of the hydraulic blade pump blade in the blade groove is too large to increase leakage, too small, the blade
cannot freely expand, will lead to work disorders.
5. The axial clearance of hydraulic vane pump had a great influence on eta v.
1) small hydraulic blade pump -0.015 ~ 0.03mm 2) medium hydraulic blade pump -0.02 ~ 0.045mm
6. Oil temperature and viscosity generally should not exceed 55℃, viscosity requirements between 17 ~ 37mm2 / s. Too large
viscosity is difficult to absorb oil; If the viscosity is too small, the leakage is serious.
the suction liquid from the oil inlet side to the oil outlet side. In addition to the management of the hydraulic vane pump need
to prevent dry rotation and overload, prevent the inhalation of air and vacuum too large, should also pay attention to:
1. Hydraulic vane pump steering change, then its suction and discharge direction also changes the hydraulic vane pump have a
specified steering, not allowed to reverse. Because the rotor cotyledon groove is inclined, the blade is chamfered, the bottom of
the blade is connected with the oil discharge chamber, and the throttle groove and suction and outlet on the oil distribution
plate are designed according to the established steering. Reversible hydraulic vane pumps must be specially designed.
2. Assembly of hydraulic vane pump: oil distribution plate and stator: pin is correctly positioned, the blade, rotor, oil
distribution plate shall not be installed in reverse, the stator inner surface suction area is easy to wear, when necessary, the
hydraulic vane pump can be reversed installation, so that the original suction area into the discharge area and continue to use.
3. Hydraulic vane pump disassembly: pay attention to the clean working surface, working oil should be well filtered.
4. The clearance of the hydraulic blade pump blade in the blade groove is too large to increase leakage, too small, the blade
cannot freely expand, will lead to work disorders.
5. The axial clearance of hydraulic vane pump had a great influence on eta v.
1) small hydraulic blade pump -0.015 ~ 0.03mm 2) medium hydraulic blade pump -0.02 ~ 0.045mm
6. Oil temperature and viscosity generally should not exceed 55℃, viscosity requirements between 17 ~ 37mm2 / s. Too large
viscosity is difficult to absorb oil; If the viscosity is too small, the leakage is serious.
VPE-F20C-10 VPE-F20D-10 VPE-F20A-10 VPE-F20B-10 VPE-F08A-10 VPE-F08B-10
VPE-F30C-35 VPE-F30D-35 VPE-F40A-10 VPE-F40B-10 VPE-F24C-10 VPE-F24D-10
VPE-F40C-10 VPE-F40D-10 VPE-F12C-10 VPE-F12D-10 VPE-F15A-10 VPE-F15B-10
VPE-F08C-10 VPE-F08D-10 VPE-F45C-10 VPE-F45D-10 VPE-F45A-10 VPE-F45B-10
VPE-F30C-10 VPE-F30D-10 VPE-F25A-10 VPE-F25B-10 VPE-F30A-10 VPE-F30B-10
VPE-F20C-10 VPE-F20D-10 VPE-F20A-10 VPE-F20B-10 VPE-F08A-10 VPE-F08B-10
VPE-F30C-35 VPE-F30D-35 VPE-F40A-10 VPE-F40B-10 VPE-F24C-10 VPE-F24D-10
VPE-F30A-35 VPE-F30B-35 VPE-F24A-10 VPE-F24B-10 VPE-F15C-10 VPE-F15D-10
VPE-F25C-10 VPE-F25D-10 VPE-F35A-10 VPE-F35B-10 VPE-F12A-10 VPE-F12B-10
VPE-F8D-10,VPE-F8B-10,VPE-F8C-10,VPE-F8A-10
VPE-F12D-10,VPE-F12B-10,VPE-F12C-10,VPE-F12A-10
VPE-F15D-10,VPE-F15B-10,VPE-F15C-10,VPE-F15A-10
VPE-F20D-10,VPE-F20B-10,VPE-F20C-10,VPE-F20A-10
VPE-F24D-10,VPE-F24B-10,VPE-F24C-10,VPE-F24A-10
VPE-F25D-10,VPE-F25B-10,VPE-F25C-10,VPE-F25A-10
VPE-F30D-10,VPE-F30B-10,VPE-F30C-10,VPE-F30A-10
VPE-F35D-10,VPE-F35B-10,VPE-F35C-10,VPE-F35A-10
VPE-F40D-10,VPE-F40B-10,VPE-F40C-10,VPE-F40A-10
VPE-F45D-10,VPE-F45B-10,VPE-F45C-10,VPE-F45A-10
VPOE-F25D-10,VPOE-F25B-10,VPOE-F25C-10,VPOE-F25A-10
VPOE-F30D-10,VPOE-F30B-10,VPOE-F30C-10,VPOE-F30A-10
VPOE-F40D-10.VPOE-F40B-10.VPOE-F40C-10.VPOE-F40A-10
Company Profile
Frequently Asked Questions
1.What ls our Main Products?
1.Hydraulic pump
2.Hydraulic valve
3.Hydraulic motor
4.Hydraulic cylinder
5.Hydraulic parts
2. What about the MOQ?
3.What are your advantages?
- Adhere to quality first.
- Support customization, ODM & OEM service.
- 1-year warranty and complete after-sales support.
- Safe and fast shipping worldwide.
- 24-hour online service for your inquiries.
4.Are you a manufacturer? What’s your delivery time?
Yes, we are a manufacturer with our own factory.
Common models are in stock, and orders are usually shipped within 1–3 days.
5.Which payment methods are accepted?
We accept T/T, L/C, PayPal, VISA, Western Union, Apple Pay, Google Pay, Afterpay (Clearpay), Klarna, and Trade Assurance.
For full orders: 30% deposit, balance before shipment.
For small/sample orders: full payment in advance.
6.How will you deliver my goods?
We offer flexible shipping options: DHL, UPS, FedEx, TNT, EMS, as well as air or sea freight.
All deliveries ensure door-to-door fast and safe service.
7.How do you inspect and guarantee your products?
All products are tested before shipment to ensure perfect working condition.
We offer a 12-month warranty — if a product fails due to quality issues, we provide free spare parts or repair support.
8.What about after-sales service?
If you encounter any problem during use, please contact your sales manager or our support team at any time.
We will respond quickly and help solve the issue efficiently.
9.What are your main applications?
- Hydraulic systems
- Agricultural machinery
- Construction machinery
- Automobile industry
- Local distributors and maintenance centers
10.Can I get a discount for bulk orders?
Yes. We offer competitive wholesale prices and try our best to give benefits to long-term partners.
Shoot Us An Email
Professional Manufacturer
